Song Mode and the Song Editor
Song Mode: The METRO Page
10-13
The
Done
Soft Button
If no changes were made in the MIXER page, pressing the Done soft button calls up the MAIN
page. If changes were made, pressing the Done soft button calls up the “Save Changes” dialog.
Song Mode: The METRO Page
All of the parameters affecting the sequencer metronome are on the METRO page. Like the other
pages in the Song Editor, you can save changes made in this page.
Metronome
This parameter determines the recording modes in which the metronome plays. With
Metronome set to Off, the metronome never plays. With Metronome set to Rec, the metronome
only plays during recording. With Metronome set to Always, the metronome plays during
playback and recording.
CountOff
This parameter determines the number of measures the PC3LE will count off before recording.
With StartOnly selected, the PC3LE will only count off at the beginning of a sequence. With
Always selected, the PC3LE will count off from any point in a sequence.
Program
This parameter determines the program with which the metronome is played. If you wanted a
piano for a metronome, for instance, you could set Program to a piano program. The default
program is 998 Click Track.
Parameter Range of Values Default
Metronome Off, Rec, Always Rec
Count Off Off, 1, 2, 3, 4 (StartOnly,
Always)
1 (StartOnly)
Program Program List 998 Click Track
Channel 1 to 16 16
Strong Note 0 to 127 102
Strong Velocity 0 to 127 127
Soft Note 0 to 127 104
Soft Velocity 0 to 127 100
To Next Page
Loading...
