Setup Mode
The Setup Editor
7-19
99 NRegParM Non-Registered Parameter Most Significant Byte
100 RegParL Registered Parameter Least Significant Byte
101 RegParM Registered Parameter Most Significant Byte
102-108 MIDI 102-108 MIDI Controllers 102–108
109 MIDI 109 MIDI Controller 109. Set’s arpeggiator velocity when
ARPEGGIATOR velocity is set to MIDI 109 mode
110-119 MIDI 110-119 MIDI Controllers 110–119
120 Sound Off Stops all sound in the corresponding channel
121 RstCtls Reset Controllers to defaults in the corresponding channel
122 Local
123 Notes Off Sends Note Off Message to all playing notes in the
corresponding channel
124 Poly
125 Omni
126 Mono On
127 Mono Off
128 Pitch Pitch—values above and below 64 bend the pitch up and
down, respectively
129 PitchRev Pitch—values above and below 64 bend the pitch down and
up, respectively
130 PitchUp Pitch—values above 0 bend the pitch up
131 PitchDwn Pitch—values above 0 bend the pitch down
132 Pressure Pressure
133 Tempo Tempo
134 KeyNum Triggers playback of notes by Key Number—e.g., C4 is 60.
Send a velocity first with Destination135, KeyVel.
135 KeyVel Key Velocity
136 ProgInc Program Increment—increments current program number
137 ProgDec Program Decrement—decrements current program number
138 ProgGoto Go to Program—selects program
139 SetupInc Setup Increment—increments current setup number
140 SetupDec Setup Decrement—increments current setup number
141 SetpGoto Go to Setup—selects setup
142 Start Sequencer function
143 Stop Sequencer function
144 Continue Sequencer function
145 TransUp Transpose Up (ST)
146 TransDown Transpose Down (ST)
Controller
Number
Corresponding
Destination
Name
Description
Table 7-1 Controller Destination List (Continued)
To Next Page
Loading...
