Setup Mode
The Setup Editor
7-21
166 RiffVel Riff Velocity (See
Riffs
on page 7-51)
167 RiffDly Riff Delay (See
Riffs
on page 7-51)
168 TapTempo Tap Tempo (See
Tap Tempo Button
on page 7-4)
169 KB3Mutes KB3 Mutes—in Setup Mode, values of 63 and below set the
switches to KB3 controls in that setup, and a values of 64 and
above set switches to mute zones (see
Set Controls KB3
(KB3CTL)
on page 7-65.)
170 -Arp Shift Sets ARPEGGIATOR values for Shift to negative. 0-63 = off,
64-127 = on. (See
The ARPEGGIATOR Page
on page 7-36)
171 ShiftPatt Selects one of the 128 patterns in the current
ARPEGGIATOR ShiftPatt Bank. (See
The ARPEGGIATOR
Page
on page 7-36)
172 ShiftPBank Each increment of 7 (0-6, 7-13...112-127) selects one of the
17 ARPEGGIATOR ShiftPatt Banks. (See
The
ARPEGGIATOR Page
on page 7-36)
173 VelPatt Selects one of the 128 patterns in the current
ARPEGGIATOR VelPatt Bank. (See
The ARPEGGIATOR
Page
on page 7-36)
174 VelPBank Each range of seven values (0-6, 7-13...112-127) selects one
of the 17 ARPEGGIATOR VelPatt Banks. (See
The
ARPEGGIATOR Page
on page 7-36)
175 VelFixed Set’s arpeggiator velocity when ARPEGGIATOR velocity is
set to Fixed. (See
The ARPEGGIATOR Page
on page 7-36)
176 ShKeyNum Shift Key Number (see below,
Shift Key Number, Shift Key
(ShKeyNum, ShiftKey)
on page 7-22)
177 ShiftKey Shift Key (see below,
Shift Key Number, Shift Key
(ShKeyNum, ShiftKey)
on page 7-22)
178 ShKeyNuV Same as 176 ShKeyNum, but the Shift Pattern’s velocity will
be modified by the current velocity pattern of the zone.
Controller
Number
Corresponding
Destination
Name
Description
Table 7-1 Controller Destination List (Continued)
To Next Page
Loading...
