Effects Editing
MIDI Control of Effects
7-4
PC
88
MIDI Control of Effects
The PC88Õs effects can be controlled by MIDI Continuous Controller commands. These
commands can originate from the physical controllers on the PC88 or from an external MIDI
source like a sequencer. Each processor has its own Controllers:
*To select an Algorithm, you must send a particular Controller value (second data byte), which
recalls the Algorithm from a Þxed table in software. See Appendix D for the complete list of
Algorithms and controller values.
Transmitting PC88 Effects Settings to a Sequencer
The
Xmit Rvb Sysex
parameter from the
Global
menu allows you to send SysEx messages
describing the PC88Õs current effects settings when you call a Setup. This means that when you
subsequently transmit from the sequencer to the PC88, the effects settings youÕve saved will be
used instead of the PC88Õs defaults.
Controller number Function
83 Internal Algorithm select*
90 VGM Algorithm select*
91 Internal Reverb Wet (the default assignment for Slider
A
)
92 VGM Reverb Wet
93 Internal Effects Wet (the default assignment for Slider
B
)
94 VGM Effects Wet
To Next Page
Loading...
