Kurzweil SP6-7 - FX Page; Buttons Page

Multi Edit Mode
FX Page
5-5
FX Page
Use the FX Page to enable or disable the FX of the Program in each Zone. Each Zone can
be set to Y to enable eects, or to N to disable eects. Some Zones set to Y may be displayed
as (Y). is means that there are not enough eects resources available for that Zone, and
that Zone’s eects are not loaded. If you want to use the FX for a Zone displayed as (Y), try
setting other Zones to N to make more FX resources available.
Buttons Page
Arp
e Arp parameters set whether the ARP ON/OFF button is functional for the Program in
each Zone.
When a Zone’s Arp parameter is set to Yes, the Arpeggiator for the Program in that Zone will
be controlled by the ARP ON/OFF button. When a Zone’s Arp parameter is set to No, the
Arpeggiator for the Program in that Zone is set to O.
Variation
e Variation parameters set whether the VARIATION button is functional for the Program
in each Zone.
When a Zone’s Variation parameter is set to Yes, the variation for the Program in that Zone
will be controlled by the VARIATION button. When a Zone’s Variation parameter is set to
No, the variation for the Program in that Zone is set to O.