Kurzweil SP6-7 - Global Mode; Settings Page

Global Mode
Settings Page
6-1
Chapter 6
Global Mode
Global Mode allows you to adjust performance settings which aect all Programs and Multis.
Global Mode also allows you to Store, Load, and Delete Programs and Multis, or restore
factory defaults by performing a Reset.
Navigate to each page by using the CHANNEL/PAGE buttons.
Navigate to each parameter on the current page by using the PREVIOUS and NEXT
buttons.
Change the value of the selected parameter by using the ALPHA WHEEL, or use the keypad
function of the CATEGORY buttons to type a numeric value followed by pressing the
ENTER button.
Settings Page
Tune
Use the Tune parameter to adjust the ne tuning of all Programs and Multis.
VelocityMap
e VelocityMap parameter determines the way the SP6 generates MIDI velocity
information. Dierent maps generate dierent MIDI velocity values for the same physical
key strike velocity.
e default map (Linear) provides the widest range of velocity expression, but you may want
to choose a dierent map if the default does not suit your playing style. You can select from
any of the following settings: