Kurzweil SP6-7 - File Page

Global Mode
File Page
6-8
File Page
e File Page allows you use a USB Device (such as a thumb drive) or a computer to store
and load backup les of User Objects (Programs and Multis), or to load new sounds. On the
File Page, press the ENTER button to go to the File Options Page.
File Options
On the File Options Page, use the PREVIOUS and NEXT buttons to select Load or Store,
then press the ENTER button to continue to the Load Device Page or Store Method Page.
While using the File Options Page, the playing of notes is disabled.
Load / Load Device
Use the Load Device Page to select the device you wish to load from.
Load a File from a Computer
1. Connect a USB cable from your computer to the USB COMPUTER port on the rear
panel of the SP6.
2. On the Load Device Page, use the PREVIOUS and NEXT buttons to select PC Drive,
then press the ENTER button.
3. Add a le to the SP6 drive on your computer, then eject the drive from your computer.
4. When the drive has been ejected from you computer, press the ENTER button on the
Load Page.
5. On the Load File Page, use the PREVIOUS and NEXT buttons to select the le in the
list, then press the ENTER button.
6. On the Load Method Page, use the PREVIOUS and NEXT buttons to select a load
method. See the Load Method section below for details.
Load a File from a USB Device
1. Connect a USB Device (such as a thumb drive) containing your le to the USB
STORAGE port on the rear panel of the SP6.