Kurzweil SP6-7 - MIDI Problems

Troubleshooting
MIDI Problems
7-3
MIDI Problems
Problem Sending MIDI messages to a computer or external MIDI
device is not working
Solutions Make sure the MIDI channel being used by the SP6 matches the
MIDI channel being used by the external device.
Press the LOCAL DEST button until the LCD shows “Destination
MIDI.”
If using a MIDI cable, make sure the MIDI cable is plugged into
the SP6 MIDI OUT port and the external MIDI device MIDI IN
port.
Make sure the USB or MIDI cable being used is securely
plugged in at both ends.
Try using a different USB or MIDI cable.
Problem Receiving MIDI messages from a computer or external MIDI
device is not working
Solutions Make sure the MIDI channel being used by the SP6 matches the
MIDI channel being used by the external device.
If using a MIDI cable, make sure the MIDI cable is plugged into
the SP6 MIDI IN port and the external MIDI device MIDI OUT
port.
Make sure the USB or MIDI cable being used is securely
plugged in at both ends.
Try using a different USB or MIDI cable.