To Next PageTo Next PageWhat to do if frequency can not be read on Kutai electronics Control Unit?
If the frequency cannot be read under operation on the Kutai electronics Control Unit, you can: * Change the AVR. * Change the fuse.
How to fix Kutai electronics Control Unit when it does not respond after connecting to battery?
If the Kutai electronics Control Unit does not respond when connected to the battery, you can try the following: * Change the battery. * Correct any errors. * Change the fuse. * Try another GCU-3000.
Why does Kutai electronics Control Unit stop when starter does not respond?
If the Kutai electronics Control Unit executes a stop when the starter does not respond, the following steps can be taken: * Correct the internal setting. * Change the oil pressure switch. * Change the GCU exclusive oil pressure sensor.
What causes over speed or under speed warning on Kutai electronics Control Unit?
If the Kutai electronics Control Unit module displays an over speed or under speed warning during operation, you might: * Change the governor or actuator. * Change the fuse.
Why is my Kutai electronics Control Unit showing over voltage or under voltage warning?
If the Kutai electronics Control Unit module shows an over voltage or under voltage warning during operation, you can: * Change the AVR. * Change the fuse.
How to troubleshoot high water temperature warning on Kutai electronics Control Unit?
If the Kutai electronics Control Unit module displays a high water temperature warning during operation, consider the following: * Change the water temperature switch. * Change the GCU exclusive temperature sensor.
What to do if starter motor does not disengage on Kutai electronics Control Unit?
If the Kutai electronics Control Unit starts successfully, but the starter motor does not disengage, you can: * Change the AVR. * Change the fuse. * Change to a suitable oil pressure switch. * Change the starter motor.
How to fix Kutai electronics Control Unit when starter motor disengages immediately?
If the starter motor disengages immediately during cranking and the Kutai electronics Control Unit can't start, try these solutions: * Change the battery. * Correct any errors. * Change to a suitable oil pressure switch or cancel the oil pressure switch to confirm start.
What causes low oil pressure warning on Kutai electronics Control Unit?
If the Kutai electronics Control Unit module shows a low oil pressure warning during operation, you can: * Add lubricant to the correct level. * Change the oil pressure switch.
Why does Kutai electronics Control Unit fail to start even when the starter motor responds normally?
If the starter motor responds normally, but the Kutai electronics Control Unit fails to start and the panel indicates a start failure, you might: * Add fuel. * Reset to correct stop settings. * Change the governor or actuator. * Change the fuel solenoid.
General| Brand | Kutai electronics |
|---|---|
| Model | GCU-3000 |
| Category | Control Unit |
| Language | English |
Describes the layout of controls and indicators on the GCU-3000 front panel.
Details the physical arrangement of buttons, screen, and connectors on the front.
Provides physical dimensions of the GCU-3000 and required panel cut-out.
How the generator operates automatically via remote start signals.
Step-by-step guide for manual start, stop, and operation.
Procedures for shutting down the generator and resetting the system.
Covers DC input power, system programming, and hour meter settings.
Details AC voltage, current, overload protection, and shutdown override.
Covers optional sensors, PC communication, idle function, and screen viewing.
Explains CANBus module and the comprehensive system setting programming table.
A table listing universal failure icons and their associated actions.
Explains the behavior and indication of warning conditions.
Details the process and implications of major failure shutdowns.
Detailed breakdown of each terminal pin, its function, and connection.
Visual diagrams for 3-phase 4-wire, 3-phase 3-wire, 1-phase 3-wire, and single-phase systems.
Covers issues with GCU response, starter motor engagement, and engine start failures.
Addresses problems with temperature, oil pressure, and frequency readings.
Solves overload, low oil pressure, and high temperature warnings.
Diagnoses over/under voltage, speed issues, and shutdown failures.
