To Next PageTo Next PageWhat to do if Kutai electronics Control Unit responds but starter motor does not?
If the Kutai electronics Control Unit responds normally, but the starter motor does not, consider these solutions: * Change the battery. * Correct any errors. * Change the starter motor assisting relay.
General| Brand | Kutai electronics |
|---|---|
| Model | GCU-3000 |
| Category | Control Unit |
| Language | English |
Describes the layout of controls and indicators on the GCU-3000 front panel.
Details the physical arrangement of buttons, screen, and connectors on the front.
Provides physical dimensions of the GCU-3000 and required panel cut-out.
How the generator operates automatically via remote start signals.
Step-by-step guide for manual start, stop, and operation.
Procedures for shutting down the generator and resetting the system.
Covers DC input power, system programming, and hour meter settings.
Details AC voltage, current, overload protection, and shutdown override.
Covers optional sensors, PC communication, idle function, and screen viewing.
Explains CANBus module and the comprehensive system setting programming table.
A table listing universal failure icons and their associated actions.
Explains the behavior and indication of warning conditions.
Details the process and implications of major failure shutdowns.
Detailed breakdown of each terminal pin, its function, and connection.
Visual diagrams for 3-phase 4-wire, 3-phase 3-wire, 1-phase 3-wire, and single-phase systems.
Covers issues with GCU response, starter motor engagement, and engine start failures.
Addresses problems with temperature, oil pressure, and frequency readings.
Solves overload, low oil pressure, and high temperature warnings.
Diagnoses over/under voltage, speed issues, and shutdown failures.
