8 41
EN
!
The manufacturer isnot liable for damages
ora injury caused byimproper installation
of the system. The installation should
be carried by a qualified installer who
should follow the Laser Safety Regulations
ofrespective country.
Please follow these rules during the installation:
1. Donot connect the device topower supply during
the installation. Only connect the device topower
after the installation and mounting have been
completed.
2. Mount the system only tomounting point that isstrong,
secure and away from places where nonauthorised
person could get anaccess to.
3. Always make sure the system is properly tightened
down, and that itcannot get loose and move asaresult
of sound vibrations, cables pulled on, or similar
external disturbances.
4. Always attach a safety chain or cable between the
projector and its structure (such astruss).
5. Ensure that all the cables have enough length just
incase they get caught.
6. Ensure that the system isplaced atleast 20cm away
from walls orany other objects including drapes etc.
7. Ensure that the system isplaced well away from any
heat sources including spotlights, moving heads,
radiators, etc. Make sure there isasucient air-flow
around the laser system.
8. Itisessential that the fan openings are never covered
during the laser operation.
9. Always follow the Laser Safety Regulations
ofrespective country where the laser isbeing used.
To Next Page
Loading...
Need help?
General
