1 / 4
Contemporary ContemporaryTraditional Traditional
03809* (2x)
(For Latch/
Strike Bag)
If drilling a new door, use the supplied template and the complete door drilling
instructions available at kwikset.com/doorprep
13/8" –2"
35 – 51 mm
A B
C
D
Extend the latch bolt.
Is the D-shaped hole centered in the door hole?
Install the latch.Hold the latch in front of the door hole, with the latch
face lush against the door edge.
1"
25 mm
YES NO
No adjustment is required.
Proceed to next step.
D-shaped hole D-shaped hole
Rotate latch face as
shown to extend latch.
UP is on top.
E
Install the strike on the door frame.
Make sure the hole in the door frame is drilled
a minimum of 1" (25 mm) deep.
1
2
Prepare the door and check dimensions
Install the latch and strike
or
23/8" or 23/4"
60 or 70 mm
backset
Measure to conirm that the backset is
either 23/8" or 23/4" (60 or 70 mm).
Measure to conirm that the hole in
the door edge is 1" (25 mm).
Measure to conirm that the door is between
13/8" and 2" (35 mm and 51 mm) thick.
Remove your existing deadbolt
from your door.
C D E F
B
Latch A
“B” is not included.
If needed, please contact Kwikset to
order a drive-in latch for your lock.
Keys
Exterior Assembly
Adapter
Ring
Batteries
Mounting
Plate
Parts List
For Latch / Strike
Interior Assembly
SmartKey
Tool
Measure to conirm that the hole in the door is either
21/8" (54 mm) or 11/2" (38 mm).
or
21/8"
54 mm
11/2"
38 mm
Note: Additional door
preparation may be required
for doors with 11/2" (38 mm)
holes. Consult the deadbolt
drilling instructions at
kwikset.com/doorprep
A
Make sure your door is compatible. If you have a standard deadbolt mounted
separately from the handle below it, your door is compatible.
Mortise
Lock
Not CompatibleNot Compatible
Rim
Lock
Compatible Not Compatible
Integrated
Interior
door frame
46780* (4x)
(For Latch/
Strike Bag)
*Install the longer screws
closest to the door jamb.
actual size
Strike
03809
46780
68272
69316
Latch B
For Lock
03809
46780
or
or
*Use longer screws if
holes are worn out.
You will have two extra screws.
actual size
For Latch /
Strike Bag
(2x) (2x)
(2x) (2x)
68611
69940002
Rev 02
ZWave Plus™
Installation and User Guide
Kwikset
1-866-863-6584
www.kwikset.com
ENGLISH
Required tools
Ruler
Phillips head screwdriver