Kwikset SmartCode 913 User Manual

1 / 4
61035003
Rev 03
Installation and User Guide
ENGLISH
Kwikset
1-800-327-5625
www.kwikset.com
Required tools
Ruler4 AA Batteries
Hammer Wood block
Phillips head screwdriver
Additional Tools (depending on application)
A
N or P
(2x)
NP
S
Q
A
B
B
If drilling a new door, use the supplied template and the complete
door drilling instructions available at www.kwikset.com/doorprep.
Note: Additional door preparation may be
required for doors with 11/2" (38 mm) holes.
Consult the deadbolt drilling instructions at
www.kwikset.com/doorprep.
or
backset
Measure to conirm that the hole in
the door is either 21/8" (54 mm) or
11/2" (38 mm).
Measure to conirm that the backset is
either 23/8" or 23/4" (60 or 70 mm).
23/8" or 23/4"
60 or 70 mm
13/8" –2"
35 – 51 mm
Measure to conirm that the hole in
the door edge is 1" (25 mm).
Measure to conirm that the door is
between 13/8" and 2" (35 mm and
51 mm) thick.
A
A D
B C D
Is the door edge chiseled? Which latch are you installing?
21/8"
54 mm
11/2"
38 mm
1"
25 mm
YES NO
Use latch “A”. If the
latch bolt is not already
extended, extend the
latch bolt as shown.
wood
block
actual
size
Use latch “B” (not
included). If the latch
bolt is not already
extended, extend the
latch bolt as shown.
Latch “A” Latch “B”
S (2x)
C
Q (2x)
Longer screws
install closest to
the door jamb.
door frame
E
Install strike on the door frame.
Make sure the hole in the door frame is drilled a
minimum of 1" (25 mm) deep.
or
chiseled
not
chiseled
or
1
Prepare the door and check dimensions
2
Install the latch and strike
Latch
“B” is not included. If needed,
please contact Kwikset to order
a drive-in latch for your lock.
Strike
C
Keys
E
A
B
Exterior Assembly
Adapter
Ring
D
Mounting
Plate
Parts in the box
Fasteners
03809 46780
N
Q
S
P
48654 64109
T
V
49191
U
Contempo rary
Interior Assembly
SmartKey
Tool
H
Trad iti onal
M
M
Trad iti onal
F F
Contempo rary
K L
G
A
B
A
B
B
C
Is the D-shaped hole centered in the door hole?
Hold the latch in front of the door hole, with the latch
face lush against the door edge.
YES NO
No adjustment is required.
Proceed to next step.
D-shaped hole D-shaped hole
Rotate latch face as
shown to extend latch.
or

Kwikset SmartCode 913 Specifications

General

Lock Type	Electronic Deadbolt
Keyless Entry	Yes
Keypad	Yes
Battery	4 AA batteries
SmartKey Security	Yes
Finish Options	Satin Nickel, Venetian Bronze, Polished Brass
Auto-Lock	Yes
ANSI Grade	Grade 2
Backset	Adjustable 2-3/8" or 2-3/4"
Battery Life	Approximately 1 year
Keyway	KW1
One-Touch Locking	Yes
Number of User Codes	30
Finish	Varies by model (Satin Nickel, Venetian Bronze, Polished Brass)