Kwikset Kevo Setup

Bluetooth Enabled Gateway Setup
Bluetooth Enabled Gateway Setup
61844 / 01
Requirements:
• Internet service
• Internet router with
available Ethernet port
• Active Kevo Plus
membership
Requirements:
• Internet service
• Internet router with
available Ethernet port
• Active Kevo Plus
membership
Connect and fully tighten the antenna to the back of the
gateway. Bend the antenna so that it points straight up.
Connect and fully tighten the antenna to the back of the gateway.
Bend the antenna so that it points straight up.
Plug the USB cable’s power jack end into the gateway. Plug
the USB connector into the power adapter. Plug the power
adapter into a power outlet.
Plug the USB cable’s power jack end into the gateway. Plug the USB connector
into the power adapter. Plug the power adapter into a power outlet.
Make sure the lights on the gateway are functioning. See the
Light Ring Colors on page 2. Follow the instructions inside the
Kevo app to congure your gateway.
Make sure the lights on the gateway are functioning. See the Light Ring Colors
chart on page 2. Follow the instructions inside the Kevo app to congure your
gateway.
Once congured, you may control the gateway with the Kevo
app or mykevo.com
Once congured, you may control the gateway with the Kevo app or
mykevo.com.
Plug one end of the Ethernet cable into the gateway.
Plug the other end into your internet router.
Plug one end of the Ethernet cable into the gateway.
Plug the other end into your internet router.
1
3
2
4
©2014 Kwikset Corporation

Kwikset Kevo Specifications

General

Connectivity	Bluetooth
Power Source	4 AA batteries
Battery Life	Approximately 1 year
Keypad	No
Material	Metal
Brand	Kwikset
Model	Kevo
Compatibility	iOS, Android
Finish Options	Satin Nickel, Polished Brass, Venetian Bronze
Keyless Entry	Yes
Remote Access	Yes (with Kevo Plus)
Lock Mechanism	Deadbolt
Rekey Technology	SmartKey Security