3. OPERATING INSTRUCTIONS
IGNITION SWITCH / HANDLEBAR LOCK
(1) ON: In this position power is connected and you are able to start the
engine. The key cannot be taken out
(2) OFF: In this position, there is no power connected and the engine will
stop. The key can be taken out.
(3) LOCK: In this position the handlebar is lock. The key can be taken out.
Locking Method
The handlebar can be locked by turning the handlebar to the left as far as
possible. Push and turn the ignition switch key counter clockwise until you
reach the “LOCK” position.
Unlocking Method
Turn the ignition switch key clockwise until you reach the “OFF” position.
The “LOCK” will release automatically.
- 10 -
To Next Page
Loading...
