EasyManua.ls Logo

KYMCO 2 STROKE - Spark Plug Inspection and Cleaning

KYMCO 2 STROKE
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 55 -
SPARK PLUG INSPECTION
h k
Fo n
ma
Spar Plug
1. Re
2.
Spark Plu
1. It is ug cleaner.
2.
Specified Spark Plug:
2-stroke Æ NGK-BR8HSA
4-stroke Æ NGK-C7HSA
(1) Decarbonizing Fouling Deposits, (2) Gap, (3) Wear
(4) Crack / Damage
Clean the spark plug at every 2000km and replace it with
a new one at every 5000km or when the centre electrode is
burnt out.
First screw in the spark plug with your fingers and then
tighten with a spark plug wrench.
Using an unspecified spark plug may damage the engine.
C ec the spark plug side electrodes for wear and tear.
uli g deposits on spark plug electrodes and big gaps
y result in a weak spark plug.
k Removal:
move the spark plug with a spark plug remover.
oval.
The installation sequence is the reverse of the rem
g Cleaning:
b
etter to remove spark plug deposits with a spark pl
ble, clean with a wire brush.
If a spark plug cleaner is not availa
The side electrode gap is 0.6 – 0.7mm.

Related product manuals