KYMCO 2 STROKE - Fuse Replacement Procedure

FUSE REPLACEMENT
zed
se.
REPLACIN
1. .
2. p ).
• it usually indicates a short When frequent fuse failure occurs,
circuit or an overload in the electrical system. See your authori
KYMCO dealer for repair.
battery
• The fuse holder (1) is located in a compartment under the
cover.
• The specified fuses are: 7A
• ent.
The spare fuse (2) is on the battery compartm
• To prevent accidental short-circuiting, turn OFF
The ignition switch before checking or replacing a fu
G THE FUSE:
Remove the battery cover by removing the screw. (See pg 45)
O fuse with the clips (2
en the fuse holders (1) and lift out the
- 48 -