KYMCO 2 STROKE - SCOOTER COMPONENT INSPECTIONS; Shock Absorber and Brake Performance Checks; Mirror, License Plate, and Reflector Checks; Previous Damage and Lubrication Checks

FRONT/REAR SHOCK ABSORBER INSPECTION
• Check the condition of the front and rear shock absorbers by
pressing down on the handlebar and seat several times.
BRAKE PERFORMANCE INSPECTION
• Fully apply the front and rear brake levers and move the scooter
forward to see if the braking effect is good.
BACK MIRROR ANGLE CHECK
• Sit up straight on the scooter and check the angle of your mirrors.
LICENSE PLATE CHECK
• Check the license plate for dirt and damage, then tighten it.
REFLECTOR CHECK
• Check the reflector for dirt and damanges.
PREVIOUS DAMAGE INSPECTION
• Verify that any previous damage has been serviced and repaired.
LUBRICATION POINT CHECK
• Visually varify that all motorcycle lubrication points are properly
lubricated.
- 30 -