nd discard it.
ends of the new fuse, push them
• Do not pry the clips open to get a fuse out this could
bend them and result in poor contact with the new fuse.
• A loose fuse could cause damage to the electrical system
and even start a fire.
• After replacing the fuse, be sure to return the fuse
holder to its original location.
3. Slide the old fuse out of the clips a
4. Slide the clips (2) onto the
back into the fuse holder (1), and close the fuse holder.
The spare fuse is on the battery compartment.
- 49 -
To Next Page
Loading...
