STARTING WITH THE KICK PEDAL
1. Place the scooter on its main stand on level ground.
2. Depress the kick pedal with force.
pedal
r 1/8 – 1/4 turn
•
• After starting the engine be sure that the kick pedal is
returned to its original position.
• The exhaust contains carbon monoxide which is poisonous
and is harmful to the human body. Never run the engine
• starting the scooter.
• When the engine is cold and does not start after the kick
is depressed 3 – 4 times, rotate the throttle grip fo
to facilitate starting.
• Warm up the engine for approximately 2 – 3 minutes after a
cold start.
accelerations and by riding at low riding
By avoiding sudden
speeds after starting the engine the engine service life will be
prolonged.
in a closed area.
Turn off all light switches before
- 33 -
To Next Page
Loading...
