3. Wash the air filter gently but thoroughly in solvent.
4. Squeeze the excess solvent out of the cleaner and let it dry.
Never use petrol (gas) or low flash solvents for
Do not twist the air cleaner when squeezing it.
6. Soak the air filter in gear oil (SAE80~90) until saturated,
then squeeze out the excess oil.
7. For installation, reverse the removal process.
et but not dripping.
5. Inspect the element. If damaged, replace it.
•
cleaning the air filter. A fire or explosion could
result
•
• The air cleaner should be w
- 42 -
To Next Page
Loading...
