KYMCO Mongoose 90

Throttle lever adjustment
Adjust the engine idling speed before
adjusting the throttle lever free play.
To adjust throttle free play:
1. Slide the rubber sleeves back to expose the
throttle cable adjuster.
2. Loosen the lock nut, then turn the adjuster
to obtain the correct free play. (3~5 mm or
0.12~0.2 in)
3. Tighten the locknut and reinstall the sleeve.
Other checks:
Check the throttle cable for kinks and signs of
wear that could cause stretching or failure.
Lubricate the throttle cable with a
commercially available lubricant to prevent
premature wear and corrosion.
NOTE:
(1) Rubber sleeve (2) Cable a
(3
(A) 3~5 mm (0.12~0.2 in)
djuster
) Locknut (4) Throttle lever
(4)
(1)
(1)
(2)
(3)
(A)
108