KYMCO Mongoose 90

109
Front brake shoe inspection
The checking of brake shoe wear will
disassemble the brake. If the lining thickness
below to the wear limit 2.0mm (0.08in), to
replace the shoes as a set. These procedures
should be performed by KYMCO dealer.
(A)
(A)
(A)
(1)
(1) Lining (A) Lining thickness
(2)
(1)
(1) Wear indicator (2) Rear brake
Rear brake pads inspection
A wear indicator is provided on each brake. The
indicators allows checking of brake pads wear.
Check the position of the indicator. If the
indicator reaches the wear limit line, ask a
KYMCO dealer to replace the pads.