4. Slide the clips onto the ends of the new fuse,
push them back into the fuse holder, and
close the fuse holder.
Thesparefuseisonthebatterycover.
．
．
Do not pry the clips open to get a fuse out;
you could bend them and cause poor contact
with the new fuse. A loose fuse could cause
damage to the electrical system and even
start a fire.
After replacing the fuse, be sure return the
fuse holder to its original location.
(1)
(2)
(1) Fuse holder (2) Clip
CAUTION:
Spark arrester cleaning (see page 139~140)
123
To Next Page
Loading...
