The protective boots should be
inspected periodically according to the
Press the auxiliary brake pedal sev-
eral times to check for firmness.
BOOTS
PROTECTIVE RUBBER
NOTE: Take the ATV to an autho-
rized KYMCO ATV dealer for this
service.
Ball Joint Boots
Right and Left)
(Upper and Lower/
Tie Rod Boots (Inner
and Outer/Right and
Left)
72
If the pedal is not firm, the system
must be bled.
2.
3.
Maintenance Schedule.
Secure the ATV on a support stand
to elevate the front wheels.
1.
Remove both front wheels.
2.
Inspect the four ball joint boots for
cracks, tears, or perforations.
3.
Check the ball joint for free-play by
grasping the steering knuckle and
turning it from side to side and up
and down.
4.
If boot damage is present or ball
joint free-play seems excessive,
contact an authorized KYMCO
ATV dealer for service.
5.
CC791
CC792
CC793
Secure the ATV on a support stand
to elevate the front wheels.
Remove both front wheels.
Inspect the four tie rod boots for
cracks, tears, or perforations.
Check the tie rod end free-play by
grasping the tie rod near the end
and attempting to move it up and
down.
If boot damage is present or tie rod
end free-play seems excessive, con-
tact an authorized KYMCO ATV
dealer for service.
Drive Axle Boots
1.
2.
3.
4.
5.
To Next Page
Loading...
