4-3
(3) ADJ Button
This button is used to select ODO, TRIP A and TRIP B.
This button is also used to adjust the time and reset the
tripmeter.
(4)
High Beam Indicator
The high beam indicator will light when the headlight switch
select to High beam.
(5) EFI System Indicator Light
Engine check lamp bright when the EFI system has fails.
(6) Neutral Gear Position Indicator
The indicator light up when gear shifts to neutral gear position.
(7) Multi-Function Display
The display includes the following functions:
Digital clock
4WD/ 2WD/ LOCK indicator
Gear Select Display
Speedometer
Battery Voltage
Fuel Gauge
Odometer/ Tripmeters/ Engine Running Time
(8) Turn Signal Indicator
Flashes when the turn signal switch is operated.
(9) Park Indicator Light
This indicator light comes on when the Rear Parking brake
lever is in the “ON” position.
To Next Page
Loading...
