Kyocera copier

Section 2 NAMES OF PARTS
2-2
(12) Drawer
(This drawer has a storage capacity of 250 sheets of standard
copy paper (80 g/m²).)
(13) Paper width guides
(Adjust these guides to fit the width of the paper that is to be
loaded in the drawer.)
(14) Paper stopper
(Adjust this stopper to fit the length of the paper that is to be
loaded in the drawer.)
(15) Stopper extension lock
(Use this lock when loading Folio or Oficio II size paper in the
drawer.)
(16) Copy storage table
(Finished copies can be ejected and stored on this table. The
copy storage table has a storage capacity of 150 sheets of
standard copy paper (80 g/m²).)
(17) Multi-bypass tray
(Set paper on this tray when copying onto small-size or special
paper.)
(18) Multi-bypass extension
(Pull out this extension when using the multi-bypass tray.)
(19) Insert guides
(Align these guides to fit the width of the paper that is to be
set on the multi-bypass tray.)
(12)
(13)
(14)
(15)
(16)
(13)
(17) (18)
(19) (19)