Section 4 BASIC OPERATION
4-4
Zoom mode
With this mode, the magnification ratio can be set to any 1%
increment between 50% and 200%.
1 Press the Recall%/Enter key. The magnification ratio will
be shown on copy quantity/magnification display and the
“%” symbol will light.
2 Press the Number of Copies / Zoom(+) or the Number of
Copies / Zoom(-) key, as appropriate, to change the
displayed magnification ratio to the desired ratio.
3 Press the Recall%/Enter key. The new magnification ratio
will be registered and the copy quantity/magnification
display will return to showing the number of copies to be
made.
Making enlarged and reduced copies
50%
200%
To Next Page
Loading...
