Kyocera copier

Section 3 PREPARATIONS
3-10
When copying onto special paper, such as thick paper (90 g/m² –
163 g/m²) and OHP transparencies, ALWAYS use the face-up tray.
The face-up tray has a storage capacity of 30 sheets of standard
copy paper (80 g/m²) but only 1 sheet of special paper should be
stored there at one time.
1 Open the face-up tray (located at the rear of the copier).
2 Perform the standard copying procedure. Finished copies
will be ejected onto the face-up tray.
NOTES
• Finished copies will be ejected face-up.
• Copies will be stored in reverse order on the face-up
tray.
IMPORTANT!
ALWAYS be sure to close the face-up tray after use.
NEVER leave the face-up tray open.
Attaching the face-up tray