Section 8 TROUBLESHOOTING
8-7
Paper jam in the multi-bypass tray
1 Remove all of the paper remaining on the multi-bypass
tray.
2 Open and then close the upper front cover. The error
indications will go out.
3 Reset the paper on the multi-bypass tray.
Original jam in the optional Document
Processor
1 Remove all of the originals remaining on the original table.
2 Open the left cover to the Document Processor.
3 Remove the jammed original.
If the original is caught in the rollers or difficult to remove
at all, proceed to the next step.
4 Open the Document Processor.
To Next Page
Loading...
