5-1
Section 5 COPY FUNCTIONS
With this mode, the images from either 2 or 4 originals can be
reduced and then combined onto a single copy. In addition, the
borderline of each original can also be marked with a solid or
dotted line.
NOTES
• It is possible for you to change the default setting for
the borderline. (See “Borderline” on page 6-3.)
Inch specification
•Only Letter (8
1/2" × 11") and Statement (5 1/2" × 8 1/2")
size originals can be used in this mode.
•Only Letter (8
1/2" × 11") size copy paper can be used in
this mode.
Metric specification
• Only A4 and A5 size originals can be used in this
mode.
• Only A4 size copy paper can be used in this mode.
2-in-1
Use this mode when you want to copy two originals onto each sheet
of copy paper.
Layout modes
Original Copy
To Next Page
Loading...
