Kyocera copier

Section 3 PREPARATIONS
3-3
5 Push the drawer securely all the way back into the copier
until it stops.
IMPORTANT!
If you will not be using the copier for a prolonged period
of time, remove all paper from the drawer(s) and seal in
its original packaging in order to protect it against
moisture.
Adjusting the paper stopper for Folio or
Oficio II size paper
Perform the following procedure to adjust the paper stopper when
you want to load Folio or Oficio II size paper into the drawer.
1 Remove the stopper extension lock from the paper stopper.
2 Slide the paper stopper towards the rear of the drawer until
the grooves (1) that are cut into the paper stopper are
aligned with the rear edge of the drawer.
3 Insert the stopper extension lock into the holes in the paper
stopper.
(1)