Section 6 COPY DEFAULT SETTINGS
6-5
F27 Upper Drawer Skewed
Feed Adjustment
Adjusts for off-center printing. -1.0 – 3.0 (mm)
(Adjustment is complete
at the time of purchase.)
6-6
6-8
F28 Paper Feeder Skewed
Feed Adjustment (option)
Adjusts for off-center printing.
* If the optional Paper Feeder is not installed
on your copier, this default setting will not
appear.
-1.0 – 3.0 (mm)
(Adjustment is complete
at the time of purchase.)
6-6
6-8
F29 Multi-Bypass Tray
Skewed Feed Adjustment
Adjusts for off-center printing. -1.0 – 3.0 (mm)
(Adjustment is complete
at the time of purchase.)
6-6
6-8
F30 Document Processor
Skewed Feed Adjustment
(option)
Adjusts for skewed feeding of originals in the
Document Processor.
* If the optional Document Processor is not
installed on your copier, this default setting
will not appear.
-6.6 – 6.6 (mm)
(Adjustment is complete
at the time of purchase.)
6-6
6-10
F31 Folio Width Adjustment Sets the width (short edge) of Folio size paper. 200 – 216 (mm)
(Default: 210 mm)
6-6
6-9
F32 Toner Coverage Report Prints out a report that shows the number of
copies made and average amount of toner
used.
--- 6-6
Item
number
Default Description Available settings
Reference
page
To Next Page
Loading...
