Kyocera DF-770 - Paper Misfeed Detection Conditions

3NC/3NB/3NK
1-4-3
Code Contents Conditions
Jam
location*
0114 Bridge cover open The bridge cover is opened during printing. I
0115 Bridge eject cover open The bridge eject cover is opened during printing. I
4901 Bridge conveying sensor 1
non arrival jam
Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 1.
F
4902 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 2.
F
4903 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 3 (paper
feeder).
F
4904 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 4 (paper
feeder).
F
4905 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 5 (SMT
paper feeder).
F
4906 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 6 (side
paper feeder).
F
4907 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 7 (side
paper feeder).
F
4908 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from duplex section.
F
4909 Bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from MP tray.
F
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).