Kyocera DF-770 - Document Finisher Cover Removal

3NC/3NB/3NK
1-5-2
1-5-2 Document finisher section
(1) Detaching and refitting the front cover and rear cover
Procedure
1. Open the DF front cover.
2. Remove three screws and then remove
the DF front cover.(Assemble)
Figure 1-5-1
3. Remove screw and then remove the Lid
rear cover.
Figure 1-5-2
DF front cover
DF front cover
(Assemble)
Screw
Screw
Screw
Lid rear cover
Screw