Kyocera DF-770 - Bridge Section Components Identification

3NC/3NB/3NK
2-2-4
(4) Bridge section
Figure 2-2-4 Bridge section
1. Bridge PWB (BRPWB).......................... Controls the paper conveying section.
2. Bridge conveying sensor1 (BRCS1) ..... Detects a paper misfeed in the bridge section.
3. Bridge conveying sensor2 (BRCS2) ..... Detects a paper misfeed in the bridge section
4. Bridge eject sensor (BRES).................. Detects a paper misfeed in the bridge eject section
5. Bridge conveying unit switch
(BRCUSW)........................................... Detects opening/closing of the bridge cover.
6. Bridge eject cover switch
(BRECSW)........................................... Detects opening/closing of the bridge eject cover.
7. Bridge conveying motor1 (BRCM1) ...... Drives the paper conveying section.
8. Bridge conveying motor2 (BRCM2) ...... Drives the paper conveying section.
9. Bridge solenoid (BRSOL)...................... Operates the feedshift guide.
2
1
3
4
7
8
9
5
6
Machine front
Machine inside Machine rear