25
Declaration of Conformity (Australia)
Manufacturer’s name: Kyocera Mita Corporation, Tamaki Plant
Manufacturer’s address: 704-19 Nojino, Tamaki-Cho, Watarai-Gun, Mie-Ken 519-0497, Japan
declares that the product
Product name: Page Printer
Model number: FS-3820N/FS-3830N (as tested with the enhancement optional units: PF-60, DU-61, and SO-60)
Description of device: This Page Printer Model FS-3830N is the 33 ppm (FS-3820N is the 28 ppm); A4 size and
utilized plane paper; laser; dry toner etc. The printer can be equipped with several
enhancement optional units
as a paper feeder as PF-60, a duplexer as DU-61, a sorter as SO-60 etc.
Conforms to the following product specifications.
AS/NZS 3548: 1995 (EN 55 022:1994 Class B)
IEC60950 (EN 60 950:2000)
IEC60825-1 (EN 60 825-1:1994+A11+A2)
The manufacturer and its merchandising companies retain the following technical documentation in anticipa-
tion of the inspection that may be conducted by the authorities concerned.
User’s instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
Kyocera Mita Australia Pty., Ltd.
6-10 Talavera Road, North Ryde, NSW, 2113, Australia
Phone: +61 2-9888-9999
Fax: +61 2-9888-9588
Declaration of Conformity (U.S.A.)
Model Number:
Laser Printer
FS-3820N/FS-3830N
(as tested with enhancement optional units:
PF-60, DU-61, SO-60.)
Trade Name: Kyocera
Responsible Party: Kyocera Mita America Inc.
Address: 225 Sand Road PO Box 40008 Fairfield, New Jersey 07004-0008, U.S.A.
Telephone number: (973) 808-8444
Fax number: (973) 882-6000
Manufacturer’s name: Kyocera Mita Corporation, Tamaki Plant
Manufacturer’s address: 704-19 Nojino, Tamaki-Cho, Watarai-Gun, Mie-Ken 519-0497, Japan
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The manufacturer and its merchandising companies retain the following technical documentation in anticipa-
tion of the inspection that may be conducted by the authorities concerned.
User’s instruction that conforms to the applicable specifications.
Technical drawings.
Descriptions of the procedures that guarantee the conformity.
Other technical information.
Kyocera Mita America Inc.
Disclaimer
We shall have no liability or responsibility to customers or any other person or entity with respect to any liability,
loss or damage caused or alleged to be caused directly or indirectly by equipment sold or furnished by us, including
but not limited to, any interruption of service, loss of business or anticipatory profits, or consequential damages
resulting from the use or operation of the equipment or software.
FS3830NIG.book 25 ページ ２００３年１２月１２日 金曜日 午前１０時０分
To Next Page
Loading...
Need help?
General