Chapter 6 Permanent Parameters
6-8
23: Main cassette, the first feeder cassette, the
third feeder cassette, and the fourth feeder
cassette.
24: Main cassette, the second feeder cassette,
the third feeder cassette, and the fourth
feeder cassette.
25: The first feeder cassette, the second feeder
cassette, the third feeder cassette, and the
fourth feeder cassette.
26: Main cassette, the first feeder cassette, the
second feeder cassette, the third feeder
cassette, and the fourth feeder cassette.
99: Switched according to the page size
command in data.
Default paper size R2 0: Size of the default paper cassette (See R4.) 0
1: Monarch (3-7/8 × 7-1/2 inches)
2: Business (4-1/8 × 9-1/2 inches)
3: International DL (11 × 22 cm)
4: International C5 (16.2 × 22.9 cm)
5: Executive (7-1/4 × 10-1/2 inches)
6: US Letter (8-1/2 × 11 inches)
7: US Legal (8-1/2 × 14 inches)
8: A4 (21.0 × 29.7 cm)
9: JIS B5 (18.2 × 25.7 cm)
10: A3 (29.7 × 42 cm)
11: B4 (25.7 × 36.4 cm)
12: US Ledger (11 × 17 inches)
13: A5 (14.8 × 21 cm)
14: A6 (10.5 × 14.8 cm)
15: JIS B6 (12.8 × 18.2 cm)
16: Commercial #9 (3-7/8 × 8-7/8 inches)
17: Commercial #6 (3-5/8 × 6-1/2 inches)
18: ISO B5 (17.6 × 25 cm)
19: Custom (11.7 × 17.7 inches)
f
30: C4 (22.9 × 32.4 cm)
f
31: Hagaki (10 × 14.8 cm)
f
32: Ofuku-Hagaki (14.8 × 20 cm)
f
33: Officio II
36: A3 Wide
37: Ledger Wide
50: Statement
51: Folio
52: Youkei 2
53: Youkei 4
Default margin settings R3 0: HP compatible margins. 0
1: Full PCL printable area.
2: Character pitch given by U2 and U3.
3: Full PCL printable area with character
pitches given by U2 and U3.
10: IBM HT reference point as the left margin.
11: Full PCL printable area for HP emulation;
HT reference point as the left margin in IBM
emulation.
12: Uses Courier font for IBM emulation, using
the pitch given by U2 and U3.
Default cassette R4 0: Multi-purpose tray 1
1: Cassette 1
2: Cassette 2
3: Cassette 3
4: Cassette 4 or Envelope/universal feeder
5: Cassette 5
6: Cassette 6
99: Envelope/universal feeder (FS-9000)
Page protect R5 1 – 3: Automatic 1
4 – 5: On
MP tray paper size R7 Same as the R2 values except: 0 0
0: Maximum paper size of the printing system
Table 6.2. Interface-independent Parameters (Sheet 4 of 7)
Environment Parameter Value Factory setting
To Next Page
Loading...
Need help?
General