Using the Operation Panel 7-45
1 Press Z while >Page Set > is displayed.
2 Press U or V repeatedly until >>Orientation appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select Portrait or Landscape using U or V.
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
LF Action (Linefeed)
This procedure instructs the printer what to do when it receives a
linefeed code (0AH).
• LF only: Linefeed is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore LF: The linefeed is ignored.
1 Press Z while >Page Set > is displayed.
2 Press U or V repeatedly until >>LF Action appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Press U or V repeatedly until the desired linefeed action appears.
5 When the desired action is displayed, press [OK].
6 Press [MENU]. The display returns to Ready.
CR Action (Carriage-Return)
This procedure instructs the printer what to do when it receives a
carriage return code (0DH).
• CR only: A carriage-return is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
1 Press Z while >Page Set > is displayed.
2 Press U or V repeatedly until >>CR Action appears.
3 Press [OK]. A question mark (?) appears.
4 Press U or V repeatedly until the desired carriage-return appears.
5 When the desired action is displayed, press [OK].
6 Press [MENU]. The display returns to Ready.
Wide A4 (Wide A4 pitch)
Turn this to On to increase the maximum number of characters that can
be printed in a line for an A4 page (78 characters at 10 pitch) and Letter
size page (80 characters at 10 pitch). This setting is only effective in PCL
6 emulation.
1 Press Z while >Page Set > is displayed.
2 Press U or V repeatedly until >>Wide A4 appears.
>>Orientation
? Portrait
>>LF Action
?
LF only
>>CR Action
?
CR only
To Next Page
Loading...
