Troubleshooting 6-17
Inside the Printer
1
Open the top cover and MP tray.
2 Lift the developer unit together with the toner container out of the
printer.
3 Open the feed cover.
4 Remove the paper from the printer
If the jammed paper appears to be pinched by rollers, pull it along
the normal running direction of the paper.
5 Insert the developer unit together with the toner container, back into
the machine.
6 Close the top cover and MP tray. The printer warms up and resumes
printing.
Note If you cannot find a paper jam, try checking inside the
rear of the printer. Refer to Rear Unit on page 6-18.
To Next Page
Loading...
