Kyocera ECOSYS FS-4020DN Printer operation panel is off, what to do?
If nothing lights up on the operation panel of your Kyocera Printer, and the fan isn't running when you turn it on, ensure the power cord is properly plugged into the power outlet at both ends. Try replacing the power cord. Also, check that the power switch is in the On ( | ) position.
How to resolve gray background issue on my Kyocera Printer?
If your Kyocera printer displays 'Gray background' and the [Attention] indicator is flashing, it means the toner is low. Install a new toner kit. Also, adjust the print density by accessing the print menu from the operation panel and selecting a lighter density setting.
How to remove dirt on paper from Kyocera ECOSYS FS-4020DN Printer?
To correct this, clean the parts in the paper paths, such as the paper cassette, etc.
Why is my Kyocera ECOSYS FS-4020DN emitting vapor from the rear?
If your Kyocera printer is emitting vapor from the rear, it may be due to low temperature near the printer or humidity in the paper. Heat generated during printing can evaporate moisture, causing the vapor. This is not a problem and printing can continue. To reduce the vapor, increase the room temperature and use paper stored in a dry place.
Why does my Kyocera ECOSYS FS-4020DN Printer say 'Enter Account'?
If your Kyocera printer displays 'Enter Account', it indicates that an account code must be entered. This message appears if you attempt to print from the operation panel (e.g., printing a status page or using the Job Retention function) when the Job Accounting function is enabled.
Why is Kyocera Software not discovering the printing system?
The printing system might be turned off, so turn it on and try again. It could also be removed from the network, so ensure it's connected. If the system is currently printing, wait until it's finished and then try searching again. It is also possible that the TCP/IP settings on your PC are not configured properly, in that case contact your network administrator. Depending on the network router configuration, a printing system may be undetectable. In some rare cases, heavy network traffic may prevent this application from detecting the printing systems, so try again later or contact your network administrator.
How to fix gray background on Kyocera ECOSYS FS-4020DN?
If your Kyocera Printer is showing a gray background on prints, check the operation panel for the Toner low message and a flashing [Attention] indicator; if present, install a new toner kit. You can also adjust the print density by accessing the print menu on the operation panel and selecting a lighter setting.
Why is my Kyocera ECOSYS FS-4020DN Printer printing completely blank pages?
If you are getting completely blank printouts from your Kyocera printer, check the toner container. Open the top cover and make sure the toner container is correctly installed in the printer. Also, verify that the application software is operating correctly.
Why won't my Kyocera ECOSYS FS-4020DN turn on?
If nothing lights up on the operation panel of your Kyocera printer, and the fan makes no noise, make sure the power cord is properly plugged into the power outlet. Connect both ends of the power cord securely and try replacing the power cord. Also, check that the power switch is in the On (|) position.
How to fix black or white vertical streaks on Kyocera ECOSYS FS-4020DN Printer?
If your Kyocera Printer is producing black or white vertical streaks, check the operation panel for a Toner low message. If displayed, install a new toner kit.
General| Print Technology | Laser |
|---|---|
| Print Speed | 40 ppm |
| Print Speed (Black) | 40 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Standard Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Processor | 400 MHz |
| Printer Type | Laser |
| Network Connectivity | Ethernet |
| Memory | 128 MB |
Identifies and illustrates components located at the front of the printer, including the operation panel.
Details the components found at the rear of the printer, such as interface connectors and the rear unit.
Describes the layout and functions of the printer's operation panel, including keys and displays.
Provides essential guidelines for selecting and using paper to ensure efficient printing and prevent damage.
Specifies the allowable paper dimensions for the paper cassette and MP tray.
Offers guidelines on paper condition, composition, and size selection for optimal print quality.
Lists available paper types, their compatibility with paper sources, weight, and duplex path settings.
Step-by-step instructions for loading paper into the printer's paper cassette.
Detailed guide on how to load paper into the Multi-Purpose (MP) tray.
Specific instructions for correctly loading envelopes into the MP tray.
Explains how to connect the printer via USB, Network, or Parallel cables.
Details how to configure network settings like TCP/IP and IPv6 on the printer.
Provides instructions for installing the printer driver on Windows and Mac OS.
Guides users on how to print documents from application software.
Explains how to access, use, and exit the printer's status monitor utility.
Instructions for removing printer software from a Windows PC.
Covers frequency, starter toner, and step-by-step replacement of the toner container.
Instructions for replacing the waste toner box, which should be done with the toner container.
Guides on cleaning the printer's interior components for optimal print quality.
Basic troubleshooting steps and tips for common printer problems.
Identifies print quality issues and provides corrective actions.
Lists common error messages and their corresponding corrective actions.
Provides instructions and locations for clearing paper jams.
Explains the printer's operation panel layout, including LCD, keys, and indicators.
Guides on navigating the printer's menu system for configuration.
Details how to set paper size and type for MP tray and cassettes.
Explains how to configure print quality, paper source, duplexing, and other print parameters.
Guides on configuring network settings like TCP/IP (IPv4/IPv6) and Bonjour.
Details how to set administrator ID, password, and interface block settings.
Covers printer maintenance tasks like restarting and service-related functions.
Overview of optional devices available to enhance printer functionality.
Instructions and precautions for installing printer memory modules.
Details on the PF-310 paper feeder and its capacity.
Instructions for installing a CompactFlash card into the printer's slot.
Information on additional options like bulk paper feeders and hard disks.
Explains specifications for parallel, USB, and network interfaces.
Describes the high-speed data transmission capabilities of the parallel interface.
Details Hi-Speed USB support, connectors, cable requirements, and pin assignments.
Outlines features like automatic IP address resolution and support for various network protocols.
Provides detailed technical specifications for printer models FS-2020D, FS-3920DN, and FS-4020DN.
Lists the environmental standards the machine conforms to, including sleep mode and duplex printing.
To Next Page