How to fix black or white vertical streaks on Kyocera ECOSYS FS-4020DN Printer?
If your Kyocera Printer is producing black or white vertical streaks, check the operation panel for a Toner low message. If displayed, install a new toner kit.
Why won't my Kyocera ECOSYS FS-4020DN turn on?
If nothing lights up on the operation panel of your Kyocera printer, and the fan makes no noise, make sure the power cord is properly plugged into the power outlet. Connect both ends of the power cord securely and try replacing the power cord. Also, check that the power switch is in the On (|) position.
Why is my Kyocera ECOSYS FS-4020DN Printer printing completely blank pages?
If you are getting completely blank printouts from your Kyocera printer, check the toner container. Open the top cover and make sure the toner container is correctly installed in the printer. Also, verify that the application software is operating correctly.
How to fix gray background on Kyocera ECOSYS FS-4020DN?
If your Kyocera Printer is showing a gray background on prints, check the operation panel for the Toner low message and a flashing [Attention] indicator; if present, install a new toner kit. You can also adjust the print density by accessing the print menu on the operation panel and selecting a lighter setting.
How to clean dirt from Kyocera ECOSYS FS-4020DN paper output?
To address dirt appearing on the top edge or back of the paper from your Kyocera Printer, clean the parts in the paper paths, such as the paper cassette.
What does 'Clean printer Press GO' mean on Kyocera ECOSYS FS-4020DN?
Please clean the inside of the Kyocera Printer. After cleaning the inside of the printer, press [GO] and the printer will be ready for printing. This message will be displayed when replacing the toner container after the message Replace toner Clean printer is displayed.
How to fix faint or blurred printing on my Kyocera ECOSYS FS-4020DN Printer?
If your Kyocera printer displays 'Faint or blurred printing', check the EcoPrint settings on the operation panel and switch it to off if it is currently on. Also, ensure that the paper type setting is correct for the paper you are using. If the Toner low message is displayed, install a new toner kit.
Why is my Kyocera ECOSYS FS-4020DN printing faint or blurred images?
If your Kyocera Printer is producing faint or blurred prints, check the EcoPrint settings on the operation panel and ensure it is switched off. Also, make sure the paper type setting is correct for the paper you are using. If the Toner low message is displayed, install a new toner kit.
Why Kyocera Printer prints status page but not computer data?
If your Kyocera Printer prints a status page but not data from your computer, check your program files and application software by trying to print another file or using a different print command. If the issue is specific to a file or application, review the printer settings for that application. Also, ensure the interface cable is securely connected at both ends, and try replacing the printer cable.
Kyocera ECOSYS FS-4020DN Printer operation panel is off, what to do?
If nothing lights up on the operation panel of your Kyocera Printer, and the fan isn't running when you turn it on, ensure the power cord is properly plugged into the power outlet at both ends. Try replacing the power cord. Also, check that the power switch is in the On ( | ) position.
General| Print Technology | Laser |
|---|---|
| Print Speed | 40 ppm |
| Print Speed (Black) | 40 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Standard Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Processor | 400 MHz |
| Printer Type | Laser |
| Network Connectivity | Ethernet |
| Memory | 128 MB |
Identifies and illustrates components located at the front of the printer, including the operation panel.
Details the components found at the rear of the printer, such as interface connectors and the rear unit.
Describes the layout and functions of the printer's operation panel, including keys and displays.
Provides essential guidelines for selecting and using paper to ensure efficient printing and prevent damage.
Specifies the allowable paper dimensions for the paper cassette and MP tray.
Offers guidelines on paper condition, composition, and size selection for optimal print quality.
Lists available paper types, their compatibility with paper sources, weight, and duplex path settings.
Step-by-step instructions for loading paper into the printer's paper cassette.
Detailed guide on how to load paper into the Multi-Purpose (MP) tray.
Specific instructions for correctly loading envelopes into the MP tray.
Explains how to connect the printer via USB, Network, or Parallel cables.
Details how to configure network settings like TCP/IP and IPv6 on the printer.
Provides instructions for installing the printer driver on Windows and Mac OS.
Guides users on how to print documents from application software.
Explains how to access, use, and exit the printer's status monitor utility.
Instructions for removing printer software from a Windows PC.
Covers frequency, starter toner, and step-by-step replacement of the toner container.
Instructions for replacing the waste toner box, which should be done with the toner container.
Guides on cleaning the printer's interior components for optimal print quality.
Basic troubleshooting steps and tips for common printer problems.
Identifies print quality issues and provides corrective actions.
Lists common error messages and their corresponding corrective actions.
Provides instructions and locations for clearing paper jams.
Explains the printer's operation panel layout, including LCD, keys, and indicators.
Guides on navigating the printer's menu system for configuration.
Details how to set paper size and type for MP tray and cassettes.
Explains how to configure print quality, paper source, duplexing, and other print parameters.
Guides on configuring network settings like TCP/IP (IPv4/IPv6) and Bonjour.
Details how to set administrator ID, password, and interface block settings.
Covers printer maintenance tasks like restarting and service-related functions.
Overview of optional devices available to enhance printer functionality.
Instructions and precautions for installing printer memory modules.
Details on the PF-310 paper feeder and its capacity.
Instructions for installing a CompactFlash card into the printer's slot.
Information on additional options like bulk paper feeders and hard disks.
Explains specifications for parallel, USB, and network interfaces.
Describes the high-speed data transmission capabilities of the parallel interface.
Details Hi-Speed USB support, connectors, cable requirements, and pin assignments.
Outlines features like automatic IP address resolution and support for various network protocols.
Provides detailed technical specifications for printer models FS-2020D, FS-3920DN, and FS-4020DN.
Lists the environmental standards the machine conforms to, including sleep mode and duplex printing.
To Next Page