Kyocera ECOSYS FS-C5350DN Operation Guide

Printing System Settings
8
KYOCERA Net Direct Print
2-up
4-up
Note
If you select Through in Layout, the value of N-up is fixed at 1
and cannot be changed. Furthermore, if you select Catalog or
Booklet, the value is fixed at 2 and cannot be changed.
Paper Size Specifies the paper size applied to the output. The default
setting is Auto.
Duplex Sets 2-sided printing. The following modes are available: Off,
Flip on Long Edge and Flip on Short Edge. The default
setting is Off.
Notes
If you select Catalog or Booklet in Layout, the value of
Duplex is fixed at the Flip on Short Edge and cannot be
changed.
This utility does not automatically recognize whether or not a
duplex printing unit is present in a printing system. Therefore,
there is a possibility that the duplex printing settings set here
may be invalid.
Resolution Specifies the printing resolution. The default setting is 600.
KIR KIR (Kyocera Image Refinement) is a smoothing function that
enhances resolution, resulting in high-quality printing. The
default setting is disabled (not checked).
EcoPrint Enables the printing system to reduce the amount of toner
consumption to save printing costs. The default setting is
disabled (not checked).
Save The Settings Saves settings in a file.
When checked, click OK to save the settings. You can select
the saved file by Load Setting File in the main window. The
default setting is disabled (not checked).
21
2
1
1 2
3 4
3
1
4
2

Kyocera ECOSYS FS-C5350DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C5350DN
Category	Printer
Language	English