Kyocera ECOSYS FS-C5350DN User Manual

2-66 Using the Operation Panel
Security
The security functions can be set up to protect printer operation and the
print data.
The options available in Security are as follows:
• ID (Administrator ID input)
• Password (Administrator password input)
• I/F Block (Interface (external device) block setting)
• NetWare (NetWare setting)
• AppleTalk (AppleTalk setting)
• IPP (IPP setting)
• SSL Server (SSL Server setting)
• IPSec (IPSec setting)
• Security Level (Security Level setting)
1 Press [MENU].
2 Press U or V repeatedly until Security > appears.
ID (Administrator ID input)
To use the Security function, you must enter an administrator ID. For
information on how to set the administrator ID, refer to Admin
(Administrator settings) on page 2-81.
1 Press Z while Security > is displayed.
2 The message display shows ID and a blinking cursor (_).
3 Press U or V to increase or decrease, respectively, the value at the
blinking cursor. Enter the specified ID. Use Y and Z to move the
cursor right and left. Enter an ID consisting of between 1 and 16
numbers.
4 Press [OK]. Proceed to the next step Password (Administrator
Password input).
Security >
ID
_

Kyocera ECOSYS FS-C5350DN Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Maximum Paper Size	A4
Connectivity	USB 2.0, Ethernet
Memory	512 MB
Operating Systems Supported	Windows, Mac, Linux
Monthly Duty Cycle	100, 000 pages
Paper Sizes	A4, A5, B5, Letter, Legal
Wireless	Optional
Toner Cartridges	Black, Cyan, Magenta, Yellow
Output Capacity	250 sheets
Print Speed (Black)	28 ppm (A4)
Print Speed (Color)	28 ppm (A4)