Chapter 4 Fonts
4-2
Resident Fonts
The printing system provides one bitmap font and 136 scalable (outline) fonts as the res-
ident fonts. Also, fonts may be downloaded to the printing system’s memory from a
computer or a memory card. These fonts are referred to as downloadable or soft fonts.
The printing system accepts as many downloadable fonts as user memory allows.
When the HP LaserJet is the printing system’s default emulation, the power-up (default)
font is Courier. A different default font can be selected by using the FRPO (Firmware
RePrOgram) command of parameters V3 (or using the printing system’s operator panel
key). For details, refer to FRPO Parameters on page 6-2.
List of Fonts
Resident scalable fonts provide an outline of characters which can be sized according to
sizing information for the font. These fonts can be scaled from 0.25 to 999.75 points in
quarter point increments.
This section shows tables of the printing system’s resident fonts. It is possible to print a
full list of resident fonts by the FLST command (or using the printing system’s operator
panel key). To print a list of fonts, command:
!R! FLST; EXIT;
The following list shows all the resident fonts in the printing system. For example, Univ-
ers-Bd means a Universe style scalable font with bold weight.
Font Name
Courier
CGTimes
CGTimes-Bd
CGTimes-It
CGTimes-BdIt
CGOmega
CGOmega-Bd
CGOmega-It
CGOmega-BdIt
Coronet
Clarendon-Cd
Univers-Md
Univers-Bd
Univers-MdIt
Univers-BdIt
Univers-MdCd
Univers-BdCd
Univers-MdCdIt
Univers-BdCdIt
AntiqueOlive
AntiqueOlive-Bd
AntiqueOlive-It
GaramondAntiqua
To Next Page
Loading...
Need help?
General
