3-3 General Settings > Wireless LAN > Certificate
From this page, the details of the certificates of wireless LAN settings can be checked.
3-4. General Settings > Password
By setting an administrator password, the access to IB-51's Web page can be restricted (excluding the Status Page).
Note:
— The default password is "Admin". We recommend setting an administrator password to prevent unauthorized changes to the IB-
51 settings.
— The password can be up to 15 characters long.
— Make a note of the password in case you forget.
Follow these steps to set up or change the password.
1. Enter the desired password in the new password field.
2. Re-enter the same password in the confirmation field.
3. Click Submit at the bottom of the page.
3-5. General Settings > Time Settings
The IB-51 obtains the current time from a time server on the network. The time is used in various reports sent from the IB-51 via e-mail.
Import PAC Select and import the PAC file, when EAP-FAST is selected for
the authentication, and automatic PAC file is disabled (Off).
Password Enter the password when importing certificates.
32 characters maximum.
Item Description
Client Certification Part of the client certificate can be referenced.
CA Certification Part of the CA certificate can be referenced.
PAC Part of the PAC file can be referenced.
Item Description
New Password Enter the new password.
Confirm New Password Enter the new password again for confirmation.
Item Description
Current Local Time Shows the time as obtained from the time server.
Time Zone For designating the offset from UTC.
Time Protocol For designating the server to obtain for the time. The available servers are as follows.
— None: Do not obtain the time from a server.
— NetWare: Obtain the time from a NetWare server.
Page 6 of 2
Using a Web Browser to Manage the I
-51
10
2
201
file:///C:/Tom/PDF/I
-51/I
-51%20Setu
%20Guide%20HTML%20En
lish/card
home
...
To Next Page
Loading...
Need help?
General