Kyocera ECOSYS FS-C8650DN Management Guide

3-6. General Settings > Reset
To enable the changes you have made to IB-51 network settings, you must restart the network interface. You can also restore the
default settings as needed.
4. Advanced Page
This page includes advanced settings applicable to all aspects of IB-51 operation. You can restrict access to this page by setting an
administrator password. Refer to 3-4. General Settings > Password for details.
Figure 3. IB-51's Web Page Advanced Page
4-1. Protocols > TCP/IP > TCP/IP
This table gives an overview of the items displayed on this page.
— SNTP Server: Obtain the time from a SNTP server. Designate the server name or IP
address.
SNTP Server Set the SNTP server name or IP address.
Item Description
Restart Network Interface Click the Restart button to restart the network interface.
Set all Network Settings to
Factory Default
Click the Reset button to restore the default network interface settings.
Page 7 of 2
2
Using a Web Browser to Manage the I
B
-51
10
/
2
/
201
2
file:///C:/Tom/PDF/I
B
-51/I
B
-51%20Setu
p
%20Guide%20HTML%20En
g
lish/card
_
home
pa
...

Kyocera ECOSYS FS-C8650DN Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C8650DN
Category	Printer
Language	English