Kyocera ECOSYS M3040idn

2-48
Installing and Setting up the Machine > Command Center RX
Printing a document stored in a Custom Box
A document stored in a Custom Box can be printed from Command Center RX.
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Press [Device Information] in the home screen and then [Identification/Network] to check the
machine's IP address or the host name.
3 From the [Document Box] menu, click [Custom Box].
4 Click the number or name of the Custom Box in which the document is stored.
Device Information Identification/Network
1
3
2