Kyocera ECOSYS M3660idn

8-33
Setup and Registration (System Menu) > System Menu
DSM Scan
Select whether to use DSM scan.
*1
Value: Off, On
LDAP Select whether to use LDAP.
Value: Off, On
SNMP -
Protocol Setting Select whether to communicate using SNMP.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
SNMPv3 -
Protocol Setting Select whether to communicate using SNMPv3.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
HTTP -
Protocol Setting Select whether to communicate using HTTP.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
HTTPS -
Protocol Setting Select whether to communicate using HTTPS.
*1, *3
Value: Off, On
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
Item Description