Kyocera ECOSYS M3660idn

9-31
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
PIN Code Authorization
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 [User Login Setting] > [PIN Login]
2
Configure the settings.
1 Select [Off] or [On].
2 Select [OK].
NOTE
When using PIN Code Authorization, the network authentication must be enabled and [Ext.] must be selected for
server type.
Enabling User Login Administration (page 9-3)
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
ECOSYS M3145idn ECOSYS M3655idn ECOSYS M3660idn
ECOSYS M3645idn
Login User Name: 4500 5500 6000
Login Password: 4500 5500 6000